Roofing Safety While Working

Any local roofer will tell you that safety is a major consideration when it comes to their dangerous occupation. Any roofing Jobsite comes fraught with potential hazards that must be avoided. Spiraling insurance costs cut into the bottom line of a professional roofer but those costs are mandatory should any mishap occur. There are a number of factors that should be accounted for and considered when it comes to working on high.

Weather Conditions

If the forecast calls for rain or snow it may make sense to postpone work until the weather is clear. Even if there is a dense fog in the morning this could add dangerous moisture to the roof which could affect balance. Frost or ice is another consideration in Northern climates. High winds can also add a variable that could affect maintaining a solid stance on the roof or when passing up sheathing or a bundle of shingles. A strong gust could make the sheathing act like a sail and could take the board, and the worker carrying the board, in the direction of the gust.

Roof Clutter

On a roofing Jobsite, there could be a number of different materials on the roof that could affect the traction of the workers. Sawdust leftover from cutting plywood sheathing could leave a slippery surface. Tools such as framing squares, tape measures, hammers, or nailers could add to clutter that could be in the way when working on a roof. Electrical cords could become tangled in workers’ boots causing a dangerous situation while high on a roof.

Roof Pitch

The pitch of a roof could definitely be a factor when it comes to maintaining balance on a roof. Obviously, the steeper the pitch the more difficult it is to keep your balance.

Roofing Footwear

When it comes to footwear when working on high, the number one consideration should be traction. Comfort is obviously another consideration especially if your feet are full of blisters after a long hard day on the roof. Since you may be working on many different roof surfaces it would behoove you to purchase boots that will have good traction on many different surfaces. The best advice is to ask a local roofer for his opinion on what is the best type of boot to wear while roofing. A professional has a vested interest in keeping himself and his workers safe at altitude.

Roofing Safety Tips

Taking the necessary precautions when working on a roof should be mandatory if you don’t want any mishaps to occur on high.

• Work with a partner. Having a partner nearby not only makes the job go quicker but will always be the safer route.

• Secure all ladders before attempting to climb them. The 1 to 4 rule should be strictly adhered to when it comes to securing a ladder. For every 4 feet of altitude, the ladder should be moved out 1 foot. For a 32 foot high roof, the bottom of the ladder should be moved out 8 feet.

• Work only in calm and dry weather conditions. Sometimes this can be a difficult rule to follow but if you want to ensure safe conditions it would behoove anyone to follow it.

• Steep roof pitches should be left to a professional. DIYers tend to think they can tackle any project, even a steep roof. But sometimes taking the cautious approach is better than taking a chance and tackling a project out of your league. A professional roofer will have the experience to deal with a steeper pitched roof.

Working on high is a dangerous business. Roofing safety should never be compromised. If you feel that a roofing job is much too aggressive for you then call a local roofer. As a result of having many years of experience, he or she will be able to steer you straight in the area of roofing safety. Take heed of their advice and ensure that the job you are about to tackle will be safe for everyone involved.

Thanks to Kwik Roofing Oshawa for the post.

Roofing Terminology

OLYMPUS DIGITAL CAMERA

Within any area of expertise, whether it be roofing or crocheting, there are a set of terms that identify that endeavor. If you are a local Baton Rouge roofer you can certainly communicate with other roofers in your area at a level that others who are not in the profession would simply not comprehend. If you are looking to become a roofer then it would certainly behoove you to educate yourself when it comes to the terminology of roofing.

Facia Board

This is the trim board that is located horizontally just below the bottom edge of the roof. If your house is equipped with gutters for rain runoff then this is the board to which the gutters are typically attached.

Drip Edge

This is a strip of non-corrosive material, typically aluminum, which is affixed to the bottom edge of a roof which allows water to run off the edge of a roof and drip clear of the facia board underneath. Without a drip edge, water will run onto the facia board leading to an eventual decay of the wood.

Sheathing

The sheathing is the wood used at the base of a roof. Plywood is the typical wood of choice for sheathing. The plywood sheathing is placed on top of the rafters and forms the structural foundation onto which the roof covering is placed.

Flashing

A non-corrosive sheet metal, aluminum, or galvanized steel that is used for waterproofing in certain areas of a roof such as a chimney, a roof valley, or roof vents.

Shingles

This is the outermost layer of a roof which can consist of many different materials. Asphalt shingles are the most popular shingle but there are other options for shingles. One is wood and more often than not western red cedar is the wood that is used due to its resistance to decay. In warmer climates, clay roofing tiles are used on roofs. Concrete tiles are another option for roofs. One option which has become increasingly popular in colder climates, as well as Baton Rouge in recent years, is the metal roof due to its resistance to extreme weather and its ability to last longer than an asphalt or wood roof.

Eaves

This is the bottom edge of the roof that overhangs the wall of the house which can add protection from the elements.

Ridge Beam

This is a beam at the top of the house which spans the full length of the roof. Rafters are placed on either side of the roof and make up the basic framework of a roof. Plywood sheathing is placed on top of the rafters.

If you’d like to become more familiar with roofing terminology, drop by a job site and speak with a local roofing contractor. He or she will be glad to fill you in on the nuances of roofing and the construction industry in general. You just may have a need to contact a roofer in your area in the near future. And being familiar with the lingo of the trade will help you understand what that upcoming roofing job just might entail.

Roofing Ideas For Your Roof

Any concrete structure, be it a commercial skyscraper or a humble residential apartment needs to have a solid and sturdy roof to protect its inmates from any natural as well as man-made disasters. Quality roofing is essential to prevent any water clogging, direct sun rays and most importantly for security purposes.

Innovation in the fields of construction and constructing material has opened up endless possibilities when it comes to roofing of a building. One can choose anything from clay to metal to shingles, marble, and even rubber. Here are some quick insights into different materials that will help you decide on the roofing material for your house

Shingles

Asphalt Shingles are the most prominently used roofing material s these are quite easy to be installed and are quite economical for every pocket. However, the biggest drawback of using them is build upon moss on the roof and their lower life expectancy

Metal roofs

Metals such as copper, steel, and aluminum make for good choices as roofing materials. Metal roofs are quite sturdy and long-lasting (can last as long as 50 years). It is quite resistant to natural forces such as wind, rain and storm and some high-quality metal shields are earthquake resistant too. If you plan to place the metal on the roof covering, you must know that it is an expensive option as compared to the shingles

Clay roof tiles

This is another popular material to cover your roof. Clay and concrete are quite resilient and can even withstand the harsher climates. More so they have a long life expectancy. But one needs to consider the facts that clay and concrete are heavier materials, these are quite expensive and are best suited for warmer climates

Slate roofs

These roofs are one of the best material options to enhance the aesthetic appeal of the roof, these are made of sedimentary rocks hence are waterproof and can last up to 100 years; however, these are the most expensive option too

Besides the above options, some of the lesser use materials for roofing are rubber, bitumen and even a mixture of bitumen, polyester, and fiberglass. The material used for roofing should not only depend on its quality, durability and pricing but also on the following factors

Slope of the roof

The shape of your roof is a major determinant in deciding the choice of the material used. Materials such as metal are good for steep roofs whereas, for a deeper slope, it is advisable to opt for asphalt or ceramic shingles

Strength of the rafter

If the rafter of the roof is strong, one should opt for stronger materials such as ceramic and tar whereas for a lighter raft, choose asphalt or sheer materials which are light in weight

Replacement

If you believe in renovating the structure every few years it is better to invest in less costly materials which are easily replaceable

The choice of roofing materials should be made in accordance with the budget and one should be extra cautious about the materials used as a well-laid roof ensures the overall safety and security of the entire building or structure.